I only hear background noise if the Gain Boost is to +30dB

I only hear background noise if the Gain Boost is to +30dB 1

I’ve experienced strange static-like or humming noise coming from my end when talking while playing games. I only hear background noise if the Gain Boost is to +30dB. Edit: This only applies if you are using your onboard sound for your Mic. If you get the Xonar card and need any help with the audio center software while you’re getting set-up, just let me know. I’ve always had mic level issues and using the boost added a lot of static. If I slide the Microphone Boost to +30db (the max) in the Control Panel, the volume of the narration is barely okay, but I get a loud background hiss/hum that is unacceptable. I am only looking to record dialog–no music, no explosions–which is why I didn’t get a high end soundcard in the first place. Remember, be patient and listen carefully to all adjustments.

I only hear background noise if the Gain Boost is to +30dB 2In Skype, if I have the microphone nearly in my mouth and yell as loud as I can, I can be heard as if I was half a mile away across an empty field, and this is the only time Skype will hear me, I’ve done over 50 test call tests. I’ve recorded using sound recorder and I can hear mouse clicks and everything just fine. My current settings are 100 and Boost +30db. That mic gain is pretty high, you might have it so high that the noise is drowning out your voice. When I connect it direct to the computer: no sound when using Edius. When I use Windows Media Player: no problem, sound is there, headphone works fine. If you have a sound program make sure your microphone is working and the gain/boost is set up. I can hear myself in the background only in one channel if I talk very loud. Probably a very dumb question: my computer has onboard audio. The mic boost is set at +30dB. On the other side they could hear me but my voice. Check if the microphone will still register low sound quality.

My question is how can I enable background noise suppression in ALSA/PulseAudio? If this is a feature of the device and not just the software it came with (it’s probably the former), then it has to be implemented in the kernel driver. So unless you hear any different, you are probably out of luck. I can boost up the gain to max (20 for Soundcard, 30 for on-board) and. The only way to get myself audible is to also have hissy noise from cranking up the gain. Something tells me if I built a brand new system with new motherboard, sound card, etc. In particular, listen to the ones at 20/30 dB gain. Microphone only does it in +10db, +20db, +30db settings. Only the +10db is somewhat tolerable and gives my microphone enough of a boost that I don’t have to yell as loud as possible for others to hear. As in very loud crystal clear sound even with the mic at a distance from your mouth, unlike this one where its very low and I have to suck on it, except if I turned the gain up then I get loud static as a side effect.

(help Please) Mic Extremely Faint

I thought i had electrical noise being picked up by my mic. I only hear background noise if the Gain Boost is to +30dB. If you do need +30dB of boost on your mic, I would suggest you are careful about routing wires close to the Phoebus and keeping it away from other cards (where possible). This helps, but I feel like with input maxed out and a 30db boost, I should be worried about peaking. Please note the audio isn’t so quiet I can’t hear it. If I do some vocals, they sound fine (except for the background buzz and hum), but again, I feel like a mic shouldn’t have to be boosted by that much just to pick up vocals. Would that allow me to get by for now? Surely donating is not the only way you can support this project. If that fails too, you will get notified by the installer that driver installation failed. I personally don t have any problems, no one of my friends complained about background noise, so maybe your mic is aggravating things. Glad to hear. I need to have it on microphone boost +30db and 100 microphone volume. Get the answer. I have no idea what the problem is, if it is the Via VT2020 sound or not, because on my old motherboard which used realtek hd audio it worked fine. SolvedHow to stop my laptop’s built in microphone from picking up so much background noise? However, the tx2000z microphone just doesn’t pickup and adequate voice strength even when I speak at twice. However, the tx2000z microphone just doesn’t pickup and adequate voice strength even when I speak at twice normal conversational volume and the mic volume and boost controls are at max. Mic volume and boost to +30dB and my voice can still barely be heard (background noise is terrible). Only way I can get it to recognize something substantial is when I flick the microphone.


If I plug in my Sony headphones into the headphone jack it RUINS the internal Micophone. Even when the mic is set to 100 and there is a boost of +30dB the sound quality is ver. New DV6T-6000 CTO internal microphone have intense background noise with the webcamNovember 30. We have yet to get an isight video camera, and have only used the Internal Microphone. And bending the microphone can increase mic gain by as much as 10dB. Sorry, but I have purchased this headset and had it for 1 day only. We have mic monitor to know whether or not this is giving us undesired noises in the background. Namely, instantly upping the mic boost to max (typically +30db). Noise Reduction is intended to reduce steady-state background noises, such as HVAC systems, fans, motors, or other mechanical devices, that may be picked up by the conferencing microphones and transmitted to the far end. If you hear digital artifacts when the Noise Reduction is used (especially on Medium or High settings) – lower the mic input gain level until artifacts go away. The AGC block will only adjust its gain when it receives a qualifying input signal. ERL between +15dB and +30dB. Ive got a background in motion graphics but said I wouldnt mind helping them do some video work. I dragged them into Final Cut and whacked the audio up to +30DB and you could then hear it well(ish). I just dont get why, when I had the headphones plugged in to the zoom, it played perfectly. If the files played half as good on the mac as they sounded when I played it on the Zoom I wouldnt be worried about my job.

Many people ask me if they should get a dynamic or condenser mic. Dynamic mics work very well in broadcasting situations where you want to isolate a voice and eliminate background noise, but they’re more expensive. This is currently the only USB condenser mic I’d recommend. If you prefer open-back headphones (which make it easier to hear environmental sounds at the expense of some sound leakage), try the AKG Acoustics K-240 Semi Open Studio Headphones ( 99), considered by many to be the other standard headphones for audio work.

You may also like